Th E T A 3
|
Third International Conference on |
|---|
|
Home | Committees | Submit Paper | Program | Register | Venue | Links | Contact Us |
Tentative Technical Program
|
Saturday,
December 18, 2010 |
|||
|
18:00
- 20:00: Early registration |
|||
|
Day 1 Sunday, December 19, 2010 |
|||
|
|
Registration |
|
8:00 |
|
A |
Welcome Chair:
Sabry, M.N. |
9:00 |
|
|
|
Welcoming Addresses |
|
|
|
|
Keynote talk 1: Heat and mass
transfer in hydrogen storage devices with complex hydrides; Srinivasa Muthy, S. |
|
|
|
|
Keynote 2: Zero-Emission
Datacenter and 3D Chip Stacking, Michel, B. |
|
|
|
|
Coffee Break |
|
10:40 |
|
B |
Electronics cooling Chair:
Srinivasa Murthy, S. |
11:10 |
|
|
18 |
Keynote 3: Nucleate boiling
enhancements for immersion cooling of high power electronics; El-genk M. |
|
|
|
52 |
Modeling conjugate heat transfer; Sabry M.N., Ghoneim Z., ElMatbouly M. |
|
|
|
53 |
Advanced Liquid Cooling of Multi
Chip Modules for Concentrated Photovoltaic Electric and Thermal Power
Co-Generation; Escher W., Ghannam R., Khalil A., Paredes S., Michel
B. |
|
|
|
24 |
Parametric study of pool boiling
from porous graphite foams in dielectric liquids; Jin L.W., Pranoto I., Leong K.C., Chai
J.C. |
|
|
|
|
Lunch |
|
13:00 |
|
C |
Microchannels and heat pipes Chair: Michel, B. |
14:40 |
|
|
44 |
Effect of tube diameter on
Elongated Bubble Length in Mini channels; Venkateshan
M., Balakrishnan A.R., Kumar das S. |
|
|
|
26 |
Flow Patterns and Flow Pattern
Maps for Microchannels; Ali R., Palm B., Martin-callizo C., Maqbool M. |
|
|
|
58 |
Copper Micro-channel Thermosyphon Fins for Heat Sink Application; Alam K., Flores J., Urieli I. |
|
|
|
19 |
Theoretical and experimental study
on the thermal performance of flat
miniature heat pipes including rectangular axial capillary microchannels; Mansouri J., Sassi M., Maalej S., Zaghdoudi M. |
|
|
|
|
Coffee Break |
|
16:20 |
|
D |
Thermal management Chair: Yazawa, K. |
16:50 |
|
|
67 |
Joule Heating and Gold RF MEMS
Switch Behavior; Rezvanian O., Zikry
M.A. |
|
|
|
23 |
Thermo-mechanical analysis of 3-D
multilayer structures for power electronic devices; Bagnoli
P.E., Girardi M., Padovani
C., Pagni A., Pasquinelli
G. |
|
|
|
7 |
Chimney effect on natural air
cooling of electronic equipment under inclination; Ishizuka M., Hatakeyama T., Nakagawa S., Kitamura Y., Funawatashi Y. |
|
|
|
21 |
Thermal management of personal
computer; Abbas T., Abdel-salam
K., Khedairy K. |
|
|
|
84 |
Dynamics of cold aisle air
distribution in a raised floor data center; Kumar P, Sundaralingam
V, Joshi Y |
|
|
|
Day 1 End |
18:50 |
||
|
Day 2 Monday,
December 20, 2010 |
|||
|
E |
Thermal issues at
micro and nano scales
Chair: Ragai, H.F. |
9:00 |
|
|
45 |
Counter Based CMOS Temperature
Sensor for Low Frequency Applications; Fathy O., Abdallah A., Wassal A., Ismail
Y. |
|
|
|
54 |
Molecular dynamics simulations of
oblique phonon scattering at semiconductor interfaces; Goicochea
J.V., Michel B., Amon C. |
|
|
|
68 |
Specific Heat in Nanostructures by
Quantum Mechanics; Prevenslik T. |
|
|
|
65 |
Fractal Topologies for Efficient
Solar Energy Harvesting Systems; Abdel rahman H., Kirah K. |
|
|
|
|
Coffee Break |
|
10:40 |
|
F |
Microfluidics Chair: Khater,
H. |
11:10 |
|
|
12 |
Numerical simulation of heat
transfer in aseptic processing operations involving non-Newtonian Fluids;
Krishnan S., Kannan A. |
|
|
|
51 |
Droplet dynamics over a super
hydrophobic surface; Sabry M.N., Elgharieb E. |
|
|
|
6 |
A new technique for non-catalytic
after-treatment system of diesel particulates; Yamamoto K., Fujikake F., Matsui K. |
|
|
|
73 |
Thermohydrodynamic behaviour of a thin lubricant
film; Laraqi N., Rashidi
M.M., Garcia de maria J.M., Bairi
A. |
|
|
|
|
Lunch |
|
12:50 |
|
G |
Heat Transfer
enhancement Chair: AbdelGhani,
S. |
14:30 |
|
|
61 |
Measurement of performance of very
high effectiveness heat exchangers; Meher R.S., Srinivasa Murthy S., Venkatarathnam
G. |
|
|
|
60 |
Optimum design of matrix heat
exchanger geometry; Bhanumurthy K.A., Srinivasa Murthy S., Venkatarathnam
G. |
|
|
|
33 |
Experimental Study on Convection
Heat Transfer of Single Fin Duct with Pulsated Airflow; Li S., Arik M., Uttarkar Y. |
|
|
|
36 |
Numerical analysis of heat
transfer and flow field of pulsating flow in a transverse tube; Yu J., Lin
W., Wu Y., Xu J., Yang X., Gao
J., Yang W., Liu L. |
|
|
|
83 |
Natural Convection Heat Transfer From a Heat Sink
with Hollow/Perforated Circular Pin Fins; ElShafei
E |
|
|
|
|
Coffee Break |
|
16:20 |
|
H |
Phase change Chair: El-Genk, M. |
16:50 |
|
|
72 |
Two-dimensional Front-Tracking
model for Film Evaporation; Guignard S., Shawky O., Tachon L., Abdel-salam K., Sabry M.N. |
|
|
|
14 |
Modeling of growth and motion of equiaxed dendrites in a convecting
alloy melt; Bhattacharya A., Shyamprasad K., Dutta P. |
|
|
|
62 |
Experimental and numerical
investigation of evaporative heat transfer in the vicinity of the 3-phase
contact line; Ibrahim K., Abd rabbo
M.F., Gambaryan-roisman T., Stephan P. |
|
|
|
42 |
Experiments on the characteristic
of saturated boiling heat transfer in a plate heat exchanger for
Ammonia/Lithium Nitrate and Ammonia/(Lithium Nitrate+water);
Oronel C., Amaris C., Valles M., Bourouis M. |
|
|
|
3 |
On forced convective heat transfer
of paraffin Slurry in a vertical rectangular
channel; Elboujaddaini M., Haberschill P., Mimet A. |
|
|
|
Day 2 End |
18:30 |
||
|
Day 3 The Energy Day: Tuesday, December 21, 2010 |
|||
|
I |
Energy conservation Chair: Elkady,
M. |
8:30 |
|
|
17 |
Keynote 4: Energy-performance of
air conditioned buildings: The green buildings dream; Khalil
E. |
|
|
|
46 |
Energy efficiency improvement by
housekeeping measures; Aly A.Z. |
|
|
|
69 |
Thermal Design of a Modern, Two
Floor, Zero Energy House in a Desert Compound; Serageldin
A. |
|
|
|
70 |
Influence of site on thermal
design of a two floor ZEH in the desert; Serageldin
A. |
|
|
|
|
Coffee Break |
|
10:20 |
|
J |
Panel: Energy Policy Chair:
Mahgoub, M. |
10:50 |
|
|
|
Keynote 5: Prospects for nuclear
power in the Middle East and North Africa, El-Genk, M. |
|
|
|
13 |
Keynote 6: Renewable energy in
Egypt: Challenges and prospects; Elkhayat M., Ameen E. |
|
|
|
|
Keynote 7: Strategy of power
sector and regulatory framework in Egypt; ElSalmawy,
H. |
|
|
|
|
Open discussions |
|
|
|
|
Lunch |
|
12:50 |
|
K |
Renewable energy 1 Chair: ElSalmawy,
H. |
14:30 |
|
|
56 |
System Optimization of Hot Water
Concentrated Solar Thermoelectric Generation; Yazawa
K., Shakouri S. |
|
|
|
34 |
Rigorous Optimization Procedure
for Inhomogeneous Thermoelectric Converters; Gerstenmaier
Y., Lampenscherf S. |
|
|
|
16 |
Effect of orientation on the
performance of H2/Air PEM fuel cell; Abdel-sabour
A., Elemam S.H., Awad M. |
|
|
|
22 |
Optimum Alkaline Electrolyzer - Proton Exchange Membrane Fuel Cell (PEMFC)
Coupling in a Residential Solar Stand-Alone Power System; Khater
H., Abdel-raouf A., Beshr
M. |
|
|
|
|
Coffee Break |
|
16:00 |
|
L |
Renewable energy: 2. Chair: Serag
Eldin, A. |
16:30 |
|
|
30 |
21st Century Challenges of Clean
Energy and Global Warming-Can energy storage systems meet these issues?;
Singh B., Singh O. |
|
|
|
77 |
Technical and economic analysis of
a solar –assisted air-conditioning system; Sayadi
Z., El May S., Bourouis M., Bellagi
A. |
|
|
|
29 |
Theoretical Turbine Power Yield in
Solar Chimney Power Plants; Koonsrisuk A., Chitsomboon T. |
|
|
|
|
Session End - (Buss to Banquet
leaves at 18:30) |
|
17:45 |
|
Day3 |
End |
21:45 |
|
|
Day 4 Wednesday,
December 22, 2010 |
|||
|
M |
Heat Transfer
Fundamentals Chair: Gorla,
R. |
9:00 |
|
|
80 |
Keynote 8: Measurements of heat
transport in thin films by ultrafast laser-based techniques; Elsayed-Ali H. |
|
|
|
4 |
On the synergy field between
velocity field and temperature gradient in turbulent vortical
flow; Habchi C., Lemenand
T., Della valle D., Peerhossaini
H. |
|
|
|
47 |
The Effects of Evaluation Methods
on Convective Heat Transfer Coefficients of Mini-Channel Tube Bundles; Nam
K.W., Min J.K., Jeong J.H., Kim K.S., Ha M.Y. |
|
|
|
64 |
Heat Transfer for Laminar
Thermally Developing Flow in Parallel-Plates Using the Asymptotic Method ; Awad M.M. |
|
|
|
|
Coffee Break |
|
10:50 |
|
N |
Processes heat
Transfer Chair: Elsayed-Ali,
H. |
11:20 |
|
|
10 |
Studies on drying kinetics of
solids in a rotary dryer; Linga A., Sai P.S.T. |
|
|
|
75 |
Uniform and non-uniform inlet
temperature of a vertical hot water jet injected into a rectangular tank; El-Amin M.F., Sun S. |
|
|
|
20 |
A numerical investigation of
external cooling on blown film cooling; Abdel-maksoud
M., Abdel-salam K., Awad
M. |
|
|
|
66 |
Natural convection cooling for LEU
irradiated fuel plates; Abou el maaty
T. |
|
|
|
82 |
Theoretical and Experimental
Investigation on the Performance of Hybrid Desiccant Air Conditioning System
Using Activated Alumina in a Radial Flow Packed Bed; Ramadan W., Hamed A., Elemam S., Awad M.M. |
|
|
|
|
Lunch |
|
13:00 |
|
O |
Porous media Chair:
Ghoneim, Z. |
14:40 |
|
|
79 |
Keynote 9: Two-Phase Co-Current
and Counter-Current Imbibition in a Porous Medium; El-amin
M.F., Sun S. |
|
|
|
5 |
Reduction of boiling thermal
hysteresis in immersed electronics cooling on micro-configured graphite metal
composite surfaces; Yang W.J., Zhang N., Chao D., Torii S. |
|
|
|
49 |
Experimental investigation of flow
assisted mixed convection in high porosity metal foams; Kamath
P., Balaji C., Venkateshan
S.P. |
|
|
|
74 |
Mixed convective boundary layer
flow over a vertical wedge embedded in a porous medium saturated with a nanofluid; Gorla R., Shamkha A., Rashad A.M. |
|
|
|
|
Closing session |
16:30 |
|
|
Day 4 End |
16:50 |
||